U sheet pile is a service-proven type familiar to both designers and constructors, which is extensively used for permanent structures, temporary earth-retaining works and temporary cofferdams, etc. In addition to its rigid structure, its moment of inertia per pile is relatively large, thus allowing repetitive use. Available in a range of sections, with section modulus values ranging from 456 to 4042 cm3/m. U Sheet Pile have many advantages as following: 1.It combines grest profile depth and has excellent statical properties. 2.It is quite suitable for re-use due to the symmetrical form of the single element. 3.It is possible to assemble the piles into pairs in the factory, this way couldimprove the quality and performance of installation. 4.Good corrosion resistanca performance.

Z Sheet Pile All of our sheet piles according ASTM A 328, ASTM A 690 standards. With continuous form of the web and the location of the interlock symmetrically on each side of the eneutral axis. It has great improvement on the section modulus. Following are the main advantages: 1. Large width, good installation performance 2. Extremely competative of section-modulus to mass ratio 3. Increased inertia for reduced deflection 4. Good corrosion resistance

Cofferdam(land); Cofferdam(Water); Low embankment; Deep foundation pit; Shallow underground excavation; Light-duty Sea Use; Heavy-duty Sea Use; Underground water quality control. etc.

Straight Web Pile

Trench Pile

Corner Sheet Pile